Electric Stacker / Forklift Traction Battery 48V 550Ah/5hrs Long
|Type||Lead Acid Forklift Battery|
|Application||Electric Forklift Truck|
|Technology||Tubular Positive Plates|
|Connection Type||Flexible Connection|
|Steel Tray Size||Standard or Customized|
Product Catalogs --- DIN standard
|4PzS600||600||83x198x719x750||34.8||2 or 4||2|
|5PzS750||750||101x198x719x750||42.6||2 or 4||2|
|6PzS900||900||119x198x719x750||50.5||2 or 4||2|
1. Electric forklift truck
2. Electric transporting cars
3. Electric stacker
4. Electric pallet truck
5. Tunnel/metro locomotives
6. Electric golf cart
7. Road vehicles and other deep cycle DC power supply equipment
Maintenance and Precaution
1. During the service, the following conditions should be avoided:
a) Weak charge: charging the cells weakly for a long time will
affect the service life seriously.
b) Over-charging: over-charging will lead the water of the
electrolyte electrolyze, and the temperature is much too high, and
the gassing from the positive and negative plates make the active
materials of the positive and negative plates loosen, reducing the
c) Over-discharging: the vitriolic salt configuration formed in the
positive and negative plates after over-charging is quite tight,
the active materials are hard to recover, and over-charging may
make the cell polarity reverse.
2. There will be hydrogen during the charging, especially during
the charging and after the charging, the hydrogen will be more, so
the charging room should have good ventilation, control the volume
of hydrogen for protecting from explosion.
3. If the temperature of the electrolyte is high during the
service, it will form more hydrogen and reduce the intensity of
materials and the separator, and corrupt and plates and affect the
service life seriously and quicken the aging of rubber.
4. Make certain that the surface of the cell, connectors and bolts
clean and dry. And clean the electrolyte on the cover when it
corrected to make certain the insulation is good.